ATEX Design and Competency
Xitech 2" DNAPL Pump
A 2" Smart Pump designed to recover low viscosity DNAPLs such as TCE.
They have a pumping rate of up to 3.7 l/min, an operating well depth of 60 metres, and require no above-ground controls to operate. The maximum air requirements are 14 l/min at 8.5 Bar and air quality requirements are 5-10 microns (dry air)
These pumps are completely resistant to all solvents and easily fit into a 2" well or larger.
They have a pumping rate of up to 3.7 l/min, an operating well depth of 60 metres, and require no above-ground controls to operate. The maximum air requirements are 14 l/min at 8.5 Bar and air quality requirements are 5-10 microns (dry air)
|
Model ADJ201
|
|
|
Pumping range:
|
3.78 l/min - 45 l/min
|
|
Size:
|
45mm diameter x 225mm long
|
|
Weight:
|
1.32 kg
|
| Air requirement | 14 l/min @ 8.5 Bar, 5 microns (dry air) |
Recently Viewed
- Catalytic Oxidation (Category: Vapour Treatment)
- SRX Remediation Pump (Category: Remediation Total Fluids Pumps)
- Water Level Meters (Category: Level & Interface Measurement)
- Multi-Phase Extraction System (Category: Case Studies)
- NAPL Recovery systems (Category: Pump & Treat & Skimming)
 Accessories |