Image 7
Image 6
Image 8

dropshadow-large-1

Semi automatic filters

Cornelsen can supply Amaid’s exclusive range of semi-automatic filters to suit your application. Additionally, these cleaning assemblies can be installed into most existing Amiad plastic or steel housed filters, upgrading them to semi-automatic cleaning, eliminating the need to remove the filter from the housing to clean it, thus removing the need to take the process ‘off line’, meaning no interruption of the process water flow during cleaning.

Cleaning is carried out by simply opening an exhaust valve and rotating a handle. The clogging indicator fitted to the housing indicates when the differential pressure across the filter element is above 0.5bar.

How the “Scanaway” Assembly Works

The Scanaway assembly consists of a suction-scanner, a hollow pipe with suction nozzles, that faces the inner side of the screen.

Outside the filter a handle is connected to the “suction” scanner, allowing turning of the scanner in a spiral movement so it rotates inside the screen surface without touching the screen mesh.
Opening the exhaust valve at the filter lid creates low pressure conditions in the suction scanner, which cause the scanner nozzles to suck-in the dirt particles from the screen surface and expel the dislodged particles out through the exhaust valve.

Scanning is done during the filtration process without having to stop the flow of process water through the filter.

See also the Amiad range of fully automatic scanning filters, requiring no operator.

How the “Brushaway” Assembly Works

The Brushaway assembly consists of nylon brushes fitted on a frame and inserted into the filter screen.
A simple handle, outside the filter, allows brushing away particles from the inner screen surface and expel
them out from the filter through the exhaust valve.

Brushing is done during the filtering process without having to stop the flow of process water through the filter.

See also the Amiad range of fully automatic brushing filters, requiring no operator.

How the “Clogging Indicator” Works

The Clogging Indicator is a special feature mounted on the filter pressure check points and acts like a “traffic light”. When the pressure differential across the screen reaches a pre-set value of 0.5 bar the red button of the Clogging Indicator pops-up to visually indicate that the filter needs cleaning.

For further information or to obtain a quote, please contact us.

To download a brochure, click here